Operation steps of the hottest paint mixer

  • Detail

Operating steps of paint mixer

1. Follow the general operating procedures of casting equipment

2. Check the tightness and wear of the V-belt. If it is too tight, too loose or seriously worn, it should be adjusted or replaced

3. Jog the test run first, and then idle it for minutes, check the transmission system (motor, bevel gear (5:5. You can check, print the measured data. It should be 20%, 40%, 60%, 80% of Zui heavy load, 100% of perfect shape) and whether the movement of blades is stable, and confirm the General Assembly charge: production can be carried out after all is normal

4. When working, add raw materials and water after the equipment operates normally. Metal or other objects are not allowed to be added to avoid damage to the equipment

Copyright © 2011 JIN SHI